The hydraulic system may seem complicated, but they are not as bad as many people think. Routine care practice can make you familiar with the components so that you can diagnose potential problems before they pass into serious trouble. Hydraulic system components work together and if one component is damaged because it can cause damage to other components as well.
The system usually has hoses, lines, motors, cylinders and pumps and filters, and valves, among others. Larger components such as pumps and cylinders and motors are interconnected with fittings, lines, and hoses. You can visit AT Hydraulics to get more information about commercial hydraulics.
- Prevention is the best approach to problems with any system. Start by ensuring that contaminants are kept out of the system to keep failures and common problems at bay.
- Clean the area on the dipstick and fill the hydraulic filter and plugs before removing to check or change the fluid. Pour hydraulic fluid directly into your system and keep all liquid containers tightly closed when storing.
Image Source: Google
- Consider changing filters and fluids after the first 50 hours of use to remove any contaminant particles. You can check your manual for the manufacturer’s recommendation.
- Always check the oil before use to verify the good condition and to obtain an adequate fluid level. Frothy milk or oil can indicate a leak that could slow hydraulic operation. Seal leaks immediately.
- Check the temperature of the hydraulic fluid regularly during operation. Hot or smelly fluid may be an indication that the cooling system is not working as it should. Any debris or dirt should be removed from the oil cooler or reservoir.